How To Keep Rhinestones From Falling Off Nails

Crystal Glue

Flat back Swarovski crystals are perfect for adding to a wide range of materials to adding some sparkle. They are made from atomic number 82 drinking glass and have a multi faceted face with a flat back on the reverse of the crystal that is available every bit foiled or un-foiled. The most pop manner is the 2058 Swarovski Xilion Rose Enhanced which has 14 facets to provide the ultimate in dazzle. Rhinestones tin be added to well-nigh any surface, providing the correct adhesive is used to provide a suitable bond betwixt the crystal and material. For some projects it may be necessary or advisable to use more than than one kind of adhesive if in that location are a variety of materials involved.

Training

i. If a materials surface is smooth such as rubber or plastic, lightly rubbing the surface with a fine emery fabric or sand paper will provide a meliorate bonding surface.

two. Pre wash any new fabric prior to adding agglutinative to remove any sizing.

iii. A materials surface should be dry, clean and gratuitous of any dust, grease or oil before any adhesive is practical.

How to pickup Swarovski Crystals

i. Orange stick – For very small crystals ss5 – ss7 (used for blast art) an orangish stick is the easiest tool to utilise, just wet the tip and the crystals volition stick to it.

ii. Jewel Setter – A jewel setter is a plastic wand with a gummy wax bud on the end, gently touch the crystal and it will stick to the bud, the crystal can then be dabbed with mucilage and placed into position, or only placed onto a glue surface. The bud may leave wax residue on the crystals, which can be easily wiped off in one case the adhesive is dry.

iii. Precision tip tweezers – Larger crystal can be picked upward with fine tipped tweezers.

Choosing the right adhesive for Swarovski Crystals

Swarovski recommend a range of adhesives for applying crystals to virtually materials as can be seen below.
Swarovski crystal adhesive guide

The Most Popular adhesives for Swarovski crystal rhinestones

There are a range of adhesives that are widely used by the craft and jewellery making communities that are outlined below. Some of these adhesives give off very strong fumes so care needs to be taken whilst using them.

Gem Tac Glue
Gem Tac Glue is manufactured by Buoy Adhesives it's a permanent non-toxic water based glue, that is washable afterwards 24 hours. It's an extremely popular adhesive for adding crystals to fabric (dance costumes, t-shirts, jeans etc…) considering information technology'due south both stiff easy to use and most importantly non-toxic and then it's safety to apply in a bars space. Gemtac is clear and flexible when dry so provides a skillful bond for many surfaces as the glue wont crevice if subjected to stress.
Gemtac can be used to embellish: Mobile phones, greetings cards, clothing, shoes, leather goods, wood, suede and glass.

E6000
E6000 adhesive is an industrial strength adhesive that is very popular with many craft enthusiasts because information technology sticks to just near anything and is very stiff when dry out. It takes about 24 hours to fully cure and is workable for 5 to 15 minutes when using (depending on air temperature), information technology dries to form a clear flexible condom that like Gemtac can human activity equally a shock absorber for the crystal if dropped. The downside of this agglutinative is the fumes are very strong and comprise a carcinogenic substance, so a mask needs to be worn when using. E6000 is 1 part epoxy glue so is ready to use directly out of the tube and doesn't require whatever mixing.
E6000 can be used to embellish: Mobile phones, flip flops and other footwear, it's perfect for attaching crystals to any surface made from cloth, forest, glass or metal.

GS Hypo Cement
GS Hypo Cement comes in a tube with a very fine applicator nozzle like a needle for very fine precision application. It'due south widely used for jewellery repairs and sentry making considering it allows parts to be positioned earlier drying. Information technology generally becomes tacky in 10-15 seconds but takes x-15 minutes to dry and is fully cured in an hour. The adhesive dries water clear and is recommended for non porous surfaces it's also a medium force cement that won't bond fingers.
GS Hypo Cement can be used to embellish: Jewelry, plastic, drinking glass, metal, ceramics, painted or sealed forest and other non-porous surfaces.

(There is also a GS Hypo Fabric Cement available that bonds crystals to cloth, textiles, leather, plastic, paper, craft, glass, metal, yarn and suede.)

Beacon 527
Beacon 527 is a fast drying super stiff crystal articulate adhesive that's flexible and waterproof in one case dry. It'southward an industrial strength glue similar e6000 with very strong fumes and then will demand to be used in a well ventilated area. Beacon 527 takes approximately two hours to dry out and 24 hours to fully cure. The tube has a fine tip and the adhesive consistency is less viscid than e6000 which can make precision application easier.
Buoy 527 can be used to embellish: Metal, Glass, Wood, Leather, Cardboard, Paper, Cork, Ceramics, China, Tile and shells.

Writer: Crystal and Glass Beads